If you are looking for high-quality products, please feel free to contact us and send an inquiry, email: brad@ihpa.net

What is aluminium nitride (AlN)?Aluminum nitride (a covalent-bond compound) is a white, grayish, or white-grayish atomic crystal that belongs to a diamond like nitride. Aluminum nitride formula AlN. Aluminum nitride, which is metal-treated, can replace tantalum oxide and alumina for many electronic instruments. Aluminum nitride may be produced by either reducing aluminum dioxide and carbon, or by direct aluminum-nitride.

Aluminum Nitride Ceramic Properties
Aluminum nitride has high purity and activity. It is used as a raw material to make a ceramic substrate with high thermal conductivity. The aluminum nitride substrate is a large-scale heat sink substrate that has excellent thermal conductivity. It also features a low expansion coefficient, possesses high strength, and can withstand high temperatures and chemicals. Aluminum nitride ceramics have a hardness that is higher than the traditional alumina. It is a wear-resistant material with a high level of hardness.

The aluminum nitride substrate is described below.
China has had a long tradition of developing substrates. Substrates have also been continually improved. Fiber substrates, FR-4 aluminum substrates, copper substrates and fiber substrates are traditional substrates.

The improvement of industrial requirements and the refinement of thermal expansion coefficients and heat dissipation limits, it is necessary to look for alternatives.

A ceramic substrate made of aluminum nitride using LAM technology is an ideal choice. This allows the metal to be bonded more tightly to the ceramic. The maximum is 45, Pa. This is the strength of a ceramic larger than one mm thick. The aluminum-nitride substrate is coated with a metal film that has a lower resistance and a higher resistance. It can also be customized in thickness between 1 mm and 1 mm.

Why is the aluminum-nitride ceramic substrate so much more expensive?
Comparing the aluminum substrate to the traditional ceramic one, its thermal conductivity ranges from 1 to 2W/mk. While the thermal conduction of copper reaches 383.8W/mK the thermal conduction of the insulating layers is only around 1.0W/mK. This is a better value. 1.8W/mK. The aluminum-nitride ceramic has a greater thermal conductivity. Its data ranges between 170 and 230 W/m.k.

The coefficient of thermal contraction (CTE) is one example. In LED lighting the thermal conductivity is typically 1417ppm/C for the substrate, while the CTE on the silicon chip ranges from 6ppm/C. PCBs will expand in extreme temperatures and drastic temperature changes. This can lead to desoldering problems. CTE is 4-5ppm/C for aluminum nitride, which is brighter than the expansion ratio and is closer to it.

Aluminum nitride ceramics substrates do not contain organic materials, copper layers are free from oxide layers, have a long life span, can be used under reducing conditions for long periods of time and are suitable for aerospace equipment.

On the market, aluminum nitride-ceramic substrates are used widely. A low frequency loss, low dielectric constant and high density assembly (L) are possible due to their low frequency losses and low dielectric constant. /S) Resolution can reach up to 20mm. It is ideal for the small, thin, lightweight, and short device to be in line with the current trend.

Ceramic substrates have a large overseas market. Due to the importance of having a strong foundation for research and development in technology, and to the fact that the market for aluminum nitride is growing in China, this industry has been given a higher priority in recent years. Aluminum nitride is a ceramic substrate that has many advantages.

Tech Co., Ltd., a leading aluminum nitride producer, has over 12 years of experience in the chemical products research and design. Contact us if you need high-quality aluminum nitride. Send an inquiry .

Inquiry us