Trending

News

  • 0
  • 0

Which is the best way to backfill a bathroom

If you are looking for high-quality products, please feel free to contact us and send an inquiry, email: brad@ihpa.net



The backfilling of the bathroom is a crucial part of any renovation. Backfilling is an essential part of bathroom renovations. It has many purposes, including protecting the pipeline from leakage, improving the thermal insulation, etc. In selecting bathroom materials, you should consider several factors depending on your specific situation. For example, take into account the performance and cost of backfill material as well as environmental protection.

There are five types of backfills available on the market: ceramic backfills (common slag), carbon slag re-fills (carbon slag re-fills), overhead re-fills and foam cement. There's some confusion over different backfills.

Backfilling with slag can be cheaper, but because it is heavy and difficult to work with, the slag will crack the floor slab easily. This could lead to leakage of water.

It is cheaper to use overhead backfill because you don't need as much material.

Since a few decades, foamed concrete has been popular for filling bathroom backfill. But does foam cement come with any disadvantages?

For your information, here are five bathroom backfill materials with their advantages and disadvantages and some selection advice:

Building debris backfill

Advantages:

The advantages of slag backfill are its lower cost, ease of construction and certain thermal insulation properties.

Disadvantages:

Backfilling with construction waste will damage the waterproof layer and the pipeline due to its sharp edges.

Recommendation:

Has been eliminated. This is not a method that should be used. It will cost too much for a family to backfill with construction debris. To protect the waterproofing of the ground, first use fine sand, then red bricks, to protect the pipeline. The backfill should be compacted in layers. Finally, mud-mortar to level the surface will provide good secondary drainage.

Carbon Dregs Backfill

Advantages:

Carbon slag as a backfill has many advantages, including its low cost, ease of construction, lightweight structure, good moisture absorption, and excellent moisture control.

Disadvantages:

The disadvantages of carbon dregs are that they are not stable enough. They can easily deform, fall off and be relatively flimsy.

Recommendation:

In recent years, carbon slag has rarely been chosen as a backfill in bathrooms due to its negatives.

Ceramic Backfill

Advantages:

Ceramic backfill has many benefits, such as being lightweight, strong, corrosion resistant, and having a long life.

Disadvantages:

Before pouring in the ceramic, use lightweight bricks for layered partition. Divide the bathroom into several squares. Fill the squares with the ceramic, then place a reinforcing mesh with a diameter around one centimetre. Finally, level with cement mortar.

Suggestion: Look at your family's budget and take it into consideration.

Overhead Backfill

Advantages:

Backfilling with overhead backfill has many advantages, including its simplicity, stability, inability to deform and easy fall-off.

Disadvantages:

The labour cost of backfilling is higher because the construction cycle is longer. The bottom drain is located overhead and will make the sound of running waters more noticeable.

It is important to carefully consider whether the disadvantages of the situation outweigh any advantages.

Foamed Cement Backfill

Advantages:

Foamed cement is an increasingly popular backfill. It is also safe and eco-friendly. The raw material for cement foaming agents, plant-based fat acid, is both safe and environmentally friendly.

Benefits include good heat conservation, light weight, high strength and corrosion resistance. The backfilling process is greatly accelerated and reduced in cost, as it can be filled seamlessly and with very little effort.

Foamed cement can be mixed with cement and used to fix the pipe. If not, the pipe will easily float.

Disadvantages:

It is best to find a builder that has worked with foam cement or look up construction tutorials.

Suggestion:

The majority of people backfill their bathrooms with foamed-cement. Its advantages are still quite obvious.

The five types of backfill for bathrooms all have advantages and disadvantages. In order to choose the right material for your bathroom backfill, you should consider many factors. You must always consider the environment when choosing bathroom backfill materials to ensure the decor of the bathroom is safe and sustainable.

Inquiry us

High Purity 3D Printing Nickel Alloy IN718 Powder

Metal Alloy 8.92g/Cm3 High Purity Polished Copper Plate

High Purity Germanium Sulfide GeS2 Powder CAS 12025-34-2, 99.99%

Metal Alloy 18g/cm3 High Density Tungsten Alloy Ball

Metal Alloy 18.5g/cm3 Polished Tungsten Heavy Alloy Plate

High Purity Molybdenum Boride MoB2 Powder CAS 12006-99-4, 99%

High Purity Antimony Sulfide Sb2S3 Powder CAS 1314-87-0, 99.99%

High Purity Nano Hafnium Hf powder CAS 7440-58-6, 99%

Metal Alloy High Density Tungsten Alloy Rod Grind Surface Tungsten Alloy Bar

High Purity Chromium Diboride CrB2 Powder CAS 12007-16-8, 99%

High Purity Vanadium Boride VB2 Powder CAS 12007-37-3, 99%

High Purity Tungsten Silicide WSi2 Powder CAS 12039-88-2, 99%

High Purity Calcium Nitride Ca3N2 Powder CAS 12013-82-0, 99.5%

High Purity 3D Printing Nickel-based Alloy IN738 Powder

High Purity Titanium Sulfide TiS2 Powder CAS 2039-13-3, 99.99%

High Purity 3D Printing Powder 15-5 Stainless Steel Powder

High Purity Nano Ag Silver powder cas 7440-22-4, 99%

High Purity Zirconium Nitride ZrN Powder CAS 25658-42-8, 99.5%

High Purity Titanium Nitride TiN Powder CAS 25583-20-4, 99.5%

Supply Magnesium Granules Mg Granules 99.95%

Our Latest Products

High Purity 3D Printing Nickel Alloy IN718 Powder

In718 Powder is widely used for industrial and aviation turbo-propellers, petrochemical, nuclear reactors, and other fields.Particle Size: 15-45mm; 15-53mm; 53-120mm and 53-150mm 3D Printing Nickel Alloy Inconel 718 Properties: Nickel Alloy IN71…

Metal Alloy 8.92g/Cm3 High Purity Polished Copper Plate

Copper products exhibit good electrical conductivity as well as thermal conductivity. They are also ductile, resistant to corrosion, and have high wear resistance. They are widely used by the electricity, electronics and energy industries. Metal Al…

High Purity Germanium Sulfide GeS2 Powder CAS 12025-34-2, 99.99%

Germanium Sulfide (GeS2) is a semiconductor compound with the chemical Formula GeS2. It has a high solubility level in water. It's also easily soluble when heated alkali is used.Particle size : 100mesh Purity: 99.99% About Germanium Sulfide (GeS2)…