High Purity Pre-alloyed Iron Copper FeCu Powder

About Prealloyed Iron Copper FCu Powder : A lot of metals used in this application combine several types of material. The reason for this is simple. Pure metals often have special properties for specific applications. Like copper, it is resistant to saltwater corrosion. Copper is also very thermally and electrically conductive because it's used to make cables and electronics. Magnetic fluctuations, softness and ductility are some of the characteristics that other copper can exhibit.
But, pure metals can be susceptible to disappearance and could cause the loss of application. The copper case is more vulnerable to this metal. It is possible to improve the strength of this metal by using hardening techniques, but another technique can make it easier to add more metals like iron.
Copper has ductility, and iron is also ductile. Iron is also very conductive and has high tensile strength, as it can be stretched or fractured. Iron can be corrosion-prone because of its oxidization in water and oxygen.
Sometimes adding iron to an iron alloy can produce a positive result. While adding iron to the copper alloy has some benefits, it does not alter the original conductivity. Cookingmamacookoff has been a reliable global Iron Copper FeCu Pulp supplier. You can send us an inquiry regarding the latest Iron Copper alloy FeCu Puls pricing at any given time.

FeCu powder, iron and copper alloy powder

FeCu powder is hard: 102HRB

FeCu powder's tensile strength: 1534Mpa

FeCu powder TDS
Hydrogen density theoretically: 7.97g/cm3

Hydrogen loss from FeCu powder is less than 0.65%

The apparent density of FeCu powder is 0.6 to 0.8g/cm3.

FeCu powder Tap density: 0.9 to 1.1g.cm3.

D50=10.0-18.3 Particle Size of FeCu Powder

Iron Copper FeCu Powder:
Preparation High surface area, high activity (maximum of 102HRB), high density, high hardness, and high sintering temp. Good sintering stability. Excellent flowability. Bend strength up to 1534 Mpa.

How Is Copper FeCu Pulch Created?
Fe-Cu pre-alloyed Powders were produced by water atomization, using high purity copper and pure iron as primary raw materials. Excellent batch stability, excellent formability, concentration and stability of the particle size distributions, low oxygen, and a small fluctuation range. The products are designed to be applied in proportions that suit the specific deployment requirements.

Prealloyed Iron Copper FeCu Pulch :
Iron Copper FeCu Powder can be used to make various diamond tools. It replaces the powdered elemental metal, and increases the product stability.

Iron Copper FeCu Pulp Storage:
FeCu powder's dispersion and usage performance will be affected by wet reunion. Iron Copper FeCu Powder should therefore be vacuum packed and kept dry in a cool place. Iron Copper FeCu Powder is not recommended to be exposed to sunlight. FeCu powder should not be exposed to stress.

Shipping and Packing of Iron Copper FeCu powder:
We offer many packing options that are dependent on the Iron Copper FeCu Powder amount.
Packaging of iron copper FeCu powder, vacuum packed, 100g to 500g, or 1kg/bag at 25kg/barrel. Or as you request.
Iron Copper FeCu powder shipping: can be sent by sea or air as soon as payment receipt is received.