If you are looking for high-quality products, please feel free to contact us and send an inquiry, email: brad@ihpa.net
For 3D printing powder manufacturing, it is made of titanium rod and titanium alloy rod.
The Metal Alloy Titanium Rod for Making 3D Printer Powder:
These items are used for: Medical use, aircraft and ship components
Execution Standard:
Ti Titanium Bars And Titanium Alloy Barrs for Powder Production in Additive manufacturing (GB/T38973 - 2020)
Permissible size deviation:
Bar diameter deviations are allowed to be +-0.1mm
There is a maximum deviation from the bar length allowed of +-5 mm. A small bar length less than the nominal (10100) is acceptable, but it is not greater than 5%.
Each end of the bar should always be cut flat. The cutting angle should not exceed 4mm.
Maximum bending distance of bar is 0.7 mm/m
Appearance quality:
Clean the surface of bars. There should not be any oxide scales, cracks, folding or other defects. All local imperfections on the bar's surface must be eliminated and cleaned. Maximum depth shall not exceed permissible deviation.
It is permitted for the surface of the bar to not exceed half the diameter deviation due to individual small scratches, indentations or other defects.
Transportation & Payments:
Steel Alloy Titanium Rod To Make 3D Printer Powder Properties |
|
| Other Titles | Titium rod |
| N/A | |
| Compound Formula | Ti |
| Molecular Weight | N/A |
| Appearance | N/A |
| Melting Point | N/A |
| Solubility In Water | N/A |
| Density | N/A |
| Purity | N/A |
| Size | Individualized |
| Boling Point | N/A |
| Specific Heat | N/A |
| Thermo Conductivity | N/A |
| Thermal Expansion | N/A |
| Young’s Module | N/A |
| Exact mass | N/A |
| Monoisotopic | N/A |
Titanium Rod To Make 3D Printing Powder Safety & Health Information |
|
| Safety Notice | N/A |
| Hazard Statements | N/A |
| Flashing Point | N/A |
| Hazard Codes | N/A |
| Risk Codes | N/A |
| Safety statements | N/A |
| RTECS # | N/A |
| Transport Information | N/A |
| WKK Germany | N/A |
Inquiry us
In718 Powder is widely used for industrial and aviation turbo-propellers, petrochemical, nuclear reactors, and other fields.Particle Size: 15-45mm; 15-53mm; 53-120mm and 53-150mm 3D Printing Nickel Alloy Inconel 718 Properties: Nickel Alloy IN71…
Copper products exhibit good electrical conductivity as well as thermal conductivity. They are also ductile, resistant to corrosion, and have high wear resistance. They are widely used by the electricity, electronics and energy industries. Metal Al…
Germanium Sulfide (GeS2) is a semiconductor compound with the chemical Formula GeS2. It has a high solubility level in water. It's also easily soluble when heated alkali is used.Particle size : 100mesh Purity: 99.99% About Germanium Sulfide (GeS2)…