Trending

Oxide Powder

  • 0
  • 0

High Purity Indium Oxide In2O3 Powder CAS 1312-43-2, 99.9% ,

If you are looking for high-quality products, please feel free to contact us and send an inquiry, email: brad@ihpa.net



It is an innovative transparent semiconductor function material of the n-type with high bandgap and low resistivity. This has been extensively used in optical electronics, gas sensors and catalysts.

Indium Oxide In2O3 powder: Indium oxide This is an amphoteric oxygen of indium. The molecular formula for it is In2O3 . It is either a light yellow or white amorphous product, heated to make it reddish-brown. Indium oxide A new, transparent n-type semiconductor functional material with a width disabled bandwidth, smaller resistivity, and greater catalytic activity. This material has been extensively used in optical field, gas sensors and catalysts. There are also functions such as the indium oxide particle sizes, surface effect and small dimensional effects, macro quantum tunnel effect, and quantum dimensional effect.
Indium oxide This is a low-cost, oxidized oxide that has been dissolved in hydrogen. High temperatures are required to separate the low-level oxygen. Additionally, it reacts with metal indium insoluble in acid at high temperatures. The more complicated it is, the faster it disappears. The production of metal indium occurs when hydrogen can be reduced through heating with hydrogen.
Indium oxide crystallizations can only be dissolved in acid but are not insoluble in water. Two phases of the crystals can be divided: diamond type (corundum) and cubic (diamond). There is a 3eV bandgap in between the phases. You can find the information box that lists the parameters of each cubic phase. Rhombic phases are produced at high temperatures. They are produced by a non-balanced growing method. It has the spatial group R3C Number. Piersson symbol HR30, A= 0.5487NM.b = 0.5487NM.C = 0.57818NM.Z = 6, The calculation density is 7.31g/cm3.
A magnetic semiconductor is indium mixed with indium film. It has a one-phase crystal structure. The material in the rotating Syringe can be found as Indium mixed indium film.
Films made of indium oxide polycrystalline Zn doped with Zn has high conductivity (conductivity of 105 S/m), even though it is more superconductive at higher temperatures in helium. The film structure and doping are both factors that influence the superconducting temperature Tc. It is lower than 3.3k.

To receive the most current information, send us an inquiry Indium Oxide Prices Please fill out the form below if you wish to buy Indium Oxide In2O3 Powder In bulk.

Indium Oxide In2O3 Pulp Performance:
Heating to 400 500 in presence of hydrogen, or another reducing agent, can lead to the formation of metal indium and low-cost Indium oxide.
At high temperatures, it can decompose to lower oxides. At high temperatures, In2O3 can react with indium metal. While In2O3 from low-temperature combustion is readily soluble in acids, more extensive high-temperature treatments make it more difficult to dissolve and cause hygroscopicity. Indium trioxide can be reduced to hydrogen by red heat. This is how metal indium is created.

Technical Parameters of Indium Oxide Powder In2O3:
ITEM SPECIFICATIONS TEST RESULT
Appearance Light yellowish powder Light yellowish powder
In2O3(%,Min) 99.99 99.995
Impurities(%,Max)
Cu 0.8
Pb 2.0
Zn 0.5
Cd 1.0
Fe 3.0
Tl 1.0
Sn 3.0
As 0.3
Al 0.5
Mg 0.5
Ti 1.0
Sb 0.1
Co 0.1
K 0.3
Other Index
Particle Size (D50) 3-5mm

It is simple. Indium Oxide In2O3 Powder produced?
1. You can burn the indium metal in the air, or you can calcine it to create In2O,Ino, and In2O3. The In2O3 which is high in purity is obtained by controlling the reduction conditions. You can prepare the indium trioxide ceramic paste with a 20nm average size by spray burning.
2. Indium hydroxide can be burned in order to produce indium trioxide. If it's heated too hot, In2O3 may undergo thermal decomposition. However, at a low temperature it becomes difficult to dehydrate completely and gives rise to an oxide with hygroscopic properties. Heater temperature and heat time are critical factors. Because In2O3's melting point is very low, it needs to be maintained in an oxygenating atmosphere.
3. For Indium hydroxide, it is first burned in air at 850 degrees to produce In2O3. Then the indium hydroxide will be heated for 30 minutes at 1000 degrees. Indium sulfate, indium carbonate, as well as other indium substances, can all be burnt in the air for indium trioxide.

Applicaciones Indium Oxide In2O3 Powder:
Indium oxide has been widely used in the military, high-tech and scientific fields of photovoltaic industry, especially in making transparent electrodes.
It is used for producing a liquid crystal display with an inverter.
It is also used in electronic components, such as spectral purity agents and indium oxide.
The protective coating on a metallic mirror surface is made of indium oxide. Additionally, a photovoltaic LCD semiconductor film is used to create indium salts.
It is an indium oxide raw material that is used frequently in resistance touch screens. This includes fluorescent screens, glass and ceramics as well chemical reagents.
Non-ferrous metals glass can be used in ceramics, alkaline Manganese batteries and the Liu series of Indium Oxide. Chemical reagents are also available.
Some types of battery, infrared light reflectors with thin films (high mirrors), optical coatings and antistatic coatings to allow visible light transparency are made from oxydes.
The combination of tin and indium dioxide forms indium tinoxid, also known as mix indium or ITO. It is also a material transparent conductor coating.
Indium oxide, a N-type semiconductor for the integrated circuit's resistance element can be used in semiconductors.
Indium oxide can be used in certain dyeing formulas for histological research.

Indium Oxide In2O3 powder Storage:
Indium Oxide In2O3 powder should be kept in a dry, cool, and sealed environment.

Shipping and Packing of Indium Oxide Powder In2O3:
You can pack it in two plastic bags with the inside.
Packing of indium oxide In2O3 powder, vacuum packaging, 100g to 500g, or 1kg/bag at 25 kg/barrel. Or as you request.
Indium Oxide Powder Shipping: Can be shipped by sea, air or express once the payment has been received.


Seguesec advanced materials Nano Technology Co. Ltd. (Seguesec), is a trusted supplier and manufacturer of chemicals and Nanomaterials. With over 12-years experience, Seguesec has been providing high-quality chemical products.
You can contact us to request high-quality Indium Oxide . (brad@ihpa.net)

Indium Oxide In2O3 Powder Properties

Other Titles Indium Oxide, Indium(3+) oxide, India, Indium trioxide, Indium sesquioxide,
Oxo-oxoindianyloxyindigane, Indium(3+); oxygen(2-), Diindium trioxide.
1312-43-2
Compound Formula In2O3
Molecular Weight 277.64
Appearance Powdered Yellow
Melting Point 1,910deg C (3,470deg F)
Solubility In Water N/A
Density 7.18 g/cm3
Purity 99.90%
Particle Size granule, -
Boling Point N/A
Specific Heat N/A
Thermo Conductivity N/A
Thermal Expansion N/A
Young's Module N/A
Exact Mass 277.793 g/mol
Monoisotopic 277.793 Da

Safety & Health Information

Safety Notice N/A
Hazard Statements N/A
Flashing Point N/A
Hazard Codes N/A
Risk Codes N/A
Safety statements N/A
RTECS # NL1770000
Transport Information n
WGK Germany 3

Inquiry us

High Purity 3D Printing Nickel Alloy IN718 Powder

Metal Alloy 8.92g/Cm3 High Purity Polished Copper Plate

High Purity Germanium Sulfide GeS2 Powder CAS 12025-34-2, 99.99%

Metal Alloy 18g/cm3 High Density Tungsten Alloy Ball

Metal Alloy 18.5g/cm3 Polished Tungsten Heavy Alloy Plate

High Purity Molybdenum Boride MoB2 Powder CAS 12006-99-4, 99%

High Purity Antimony Sulfide Sb2S3 Powder CAS 1314-87-0, 99.99%

High Purity Nano Hafnium Hf powder CAS 7440-58-6, 99%

Metal Alloy High Density Tungsten Alloy Rod Grind Surface Tungsten Alloy Bar

High Purity Chromium Diboride CrB2 Powder CAS 12007-16-8, 99%

High Purity Vanadium Boride VB2 Powder CAS 12007-37-3, 99%

High Purity Tungsten Silicide WSi2 Powder CAS 12039-88-2, 99%

High Purity Calcium Nitride Ca3N2 Powder CAS 12013-82-0, 99.5%

High Purity 3D Printing Nickel-based Alloy IN738 Powder

High Purity Titanium Sulfide TiS2 Powder CAS 2039-13-3, 99.99%

High Purity 3D Printing Powder 15-5 Stainless Steel Powder

High Purity Nano Ag Silver powder cas 7440-22-4, 99%

High Purity Zirconium Nitride ZrN Powder CAS 25658-42-8, 99.5%

High Purity Titanium Nitride TiN Powder CAS 25583-20-4, 99.5%

Supply Magnesium Granules Mg Granules 99.95%

Our Latest Products

High Purity 3D Printing Nickel Alloy IN718 Powder

In718 Powder is widely used for industrial and aviation turbo-propellers, petrochemical, nuclear reactors, and other fields.Particle Size: 15-45mm; 15-53mm; 53-120mm and 53-150mm 3D Printing Nickel Alloy Inconel 718 Properties: Nickel Alloy IN71…

Metal Alloy 8.92g/Cm3 High Purity Polished Copper Plate

Copper products exhibit good electrical conductivity as well as thermal conductivity. They are also ductile, resistant to corrosion, and have high wear resistance. They are widely used by the electricity, electronics and energy industries. Metal Al…

High Purity Germanium Sulfide GeS2 Powder CAS 12025-34-2, 99.99%

Germanium Sulfide (GeS2) is a semiconductor compound with the chemical Formula GeS2. It has a high solubility level in water. It's also easily soluble when heated alkali is used.Particle size : 100mesh Purity: 99.99% About Germanium Sulfide (GeS2)…