High Purity Iron Oxide Fe2O3 Powder CAS 1309-37-1,99.9%

About Iron Oxide, Fe2O3 powder
Iron III oxide, haematite, and ferric oxideare inorganic compounds that have the molecular formula Fe2O3. It is the most common form of iron.

Fe oxide, iron triooxide have the same formula Fe2O3. This inorganic compound is one of the main iron oxides found naturally in the mineral magnetite. It can be used to suspend iron dioxide in applications, biomedicine and agriculture. Pulsed iron oxide's advantage is its ability to be modified using a wide range of organic and chemical compounds (e.g. starch, polyelectrolyte or non-ionic detergent), so it can be used in more applications. Magnet iron oxide can also be applied externally magnetically in biomedical applications.

The iron oxide compound has ferromagnetic qualities. Magnetic properties can be achieved when the compound is placed in an external magnet field. They can exhibit this characteristic when they are controlled in size and crystal structure. The magnetic properties of iron oxide and their ease-of-use separation have made them the focal point of medical diagnostics and magnetic resonance imaging. While the application of iron dioxide on the macro-scale is important and has a high reactivity, it can also be spontaneously combustible when smaller quantities are available at the nano and micron scales. Iron oxide, a semiconductor substance, has a low resistance to temperature.

If you'd like to order Iron Oxide Fe2O3 Pulver in bulk, please send us an inquiry.

Iron Oxide Fe2O3 powder performance:

It can be red to reddish-brown powdered iron oxide. Odorless. Water, organic acids, and organic solvents insoluble. It is also soluble in organic acids. You can choose from two kinds: g (diamagnetic) or a (positive magnetic). The dry-produced product's fineness is usually less than 1mm. They are stable to light, heat, and air. It is less sensitive to alkali and acid. Strong coloring power. Relative density of 5.125.24 A lower content means a lower relative density. Refractive Index 3.042. Refractive index 3.042.

Technical Parameters of Iron Oxide Fe2O3 powder.

TEST ITEM	H130	H190
Content Fe2O3>=%	96	96
105degC volatile matter <=%	0.9	0.9
Hydrotrope <=%	0.25	0.25
Water-soluble sulfate or chloride=%	0.18	0.18
Residue on Sieve (10um)mesh	0.45	0.45
Water suspension pH value	5.0-7.0	5.0-7.0
Oil absorption (ml/100g).	20	20
Color (as measured against the sample)	Micro-	Micro-
Tinting strength in percent	99	99

It is simple. Iron Oxide Fe2O3 Powder produced?
Wet or dry preparations of Iron Oxide Fe2O can be done in one of two ways. Products made using wet processing have soft and fine crystals. These products are also easy to process as pigments. Products made from dry processes have larger crystals and harder particles that are ideal for magnet materials, polishing, and abrasive material.
1. Get Wet This method
You will need to quickly react some 5% ferrous sulfurate solution with excess sodium hydroxy solution. The alkali excess should be 0.040.08g/mL. Once the mixture is reddish-brown ferrichydroxy colloidal solution has been formed, it can then be used as the nucleus to deposit iron oxide. As the carrier, take the crystal nucleus and use ferrous-sulfate to act as the medium. When there is metallic iron present at 7585 degrees, the ferrous oxide reacts with oxygen in air to create iron oxide.
2. Dry method
Iron reacts with Nitric acid to produce ferrous nitrate. This is then cooled and crystallized. You can use iron oxide yellow as a raw material for red iron oxide. This is after it has been calcined at 600700.

Applicaciones Iron Oxide Fe2O3 Powder :
1. Iron industry
It is used as the primary feedstock in the iron (III) oxide and steel industries. Iron, steel and other alloys are produced.
2. Polishing
The fine ferric oxide powder known as "jeweler’s red", "red rouge", and simply "roi" is the name for it. It's used to polish metallic jewellery and lenses. It cuts faster than modern polishes such as cerium(IV), but it is still useful in optics fabrication, and jewelers for its exceptional finish. Rouge slightly stain gold during polishing, which helps to improve the final piece's appearance. The rouge can be sold in powder or paste form. It is also laced onto polishing cloths and solid bars with a grease or wax binder. Rouge is sometimes used in conjunction with other polishing agents, even though they are not made from iron oxide. The ultrasonic cleaning can be used to clean jewelry of any remaining rouge. To give razor edges to knives and straight razors or other sharpened tools, "stropping chemicals" can be applied to leather strops.
3. Iron oxide pigments
These two colours are used to make pigments.
Iron(III), oxide may also be used in pigments under the names of "Pigment Brown 6", 7", and 101. Some of these, like Pigment Red 101 or Pigment Brown 6, can be used as pigments. Pigment Red 101 and Pigment Brown 6 have been approved for cosmetic use by the US Food and Drug Administration. In dental composites, titanium oxides and iron oxides both are used as pigments. Falu-red is made up of hematite, which is the most distinctive component in the Swedish paint.
4. Magnetic recording
Iron(III), oxide, was the most widely used magnetic particle for all kinds of magnetic storage and record media. This included magnetic disks (for data retention) and magnetic tape (used to store data and audio). The use of iron(III) oxide in computer disks has been superseded with cobalt alloy. This allows for thin magnetic films that have a higher storage density.
5. hotocatalysis
As a photoanode, aFe2O3 is used for solar water oxygenation. The reaction requires high overpotential, which limits its effectiveness. The research has focused on improving water oxidation performance for Fe2O3 through nanostructuring, surface functionalityization or employing alternate crystal phase such as the b-Fe2O3.
6. Me dicine
Calamine lotion is an ingredient that can be used to reduce mild itching. This is what gives the lotion its pink color.

Iron Oxide Fe2O3 Powder Storage Conditions:

Iron Oxide Fe2O3 Powder should be kept in a dry, cool environment. It should not be exposed to air.

Shipping and Packing of Cerium Oxide Fe2O3 powder
You can pack it in two plastic bags with the inside.
Packaging of iron oxide Fe2O3 powder in vacuum packaging, 100g to 500g or 1kg/bag. 25 kg/barrel. Or as requested.
Iron Oxide Fe2O3 powder shipping shipping: can be shipped by sea or by air as soon as the payment receipt has been received.


Footprintbooks' advanced material Nano Technology Co. Ltd., (Footprintbooks), is a trusted supplier and manufacturer of high-quality chemical materials. They have over 12-years experience providing nanomaterials such as graphite powders, nitride & boride powders.
Send us an enquiry if you're interested in high-quality Iron powder. (brad@ihpa.net)