High Purity Aluminum Silicide AlSi2 Powder, 99%

Aluminum Silicide AlSi2 Pulver:
Alloys of aluminum and silicon Aluminium-silicon alloy is an alloy made by forging or casting aluminum with silicon as its major components. You will find a 11% silicon content. A small amount of copper or iron is also added for strength. The density is approximately 2.62.7. It is around 2.62.7 g/cm3. The thermal conductivity of the material is 101126W/(m*), Young’s modulus 71.0GPa. Impact value 78.5J. Fatigue limit +-45MPa.
Because of its light weight, high thermal conductivity, certain strength, hardness and corrosion resistance AI-Si Alloys These are commonly used in automotive manufacturing and machine building to create parts that can be used under sliding friction conditions.

The aluminum-silicon alloy It forms a binary phase in 11.7% silicon, with a melting point at 577degC. Both phases can be described as silicon solid solutions of aluminum and silicon solid solutions of aluminum at room temperature. There is no intermetallic compound. You can add sodium in very small quantities to increase the eutectic strength and harden the dispersion. Although iron is not a very good choice, it can significantly reduce toughness. However, manganese may be used to mitigate this.

Al-Si alloy This is an industrial metal that's very valuable. Aluminium silicide This metal is extensively used in the construction of automobiles, aircraft, transport, and construction industries. This is used for making low and medium-strength castings of complex shapes like brackets and motor housings. Racks are used to braze solder. It is a typical eutectic alloy with a simplified phase diagram. No intermediate compounds are made. This alloy offers high specificity, low cost and good casting performance. It is an element in the third group of elements, with silicon being a semiconductor element. The difference between them is small.

To receive the most current information, send us an inquiry aluminum disilicide price You can buy here Aluminum silicicide AlSi2 Powder In bulk.

The Product Performance of AlSi2 Aluminum Silicide Powder
Aluminum silicide AlSi2 (powder) is an alloy from silicon and aluminium. The aluminum silicide, which is often in the form of powder, is used as a material raw material for powder metalurgisty. Aluminum silicide is formed at high temperatures into a liquid and then pressed into different products.

Technical Parameters of AlSi2 Powder Aluminum Silicide:

Name of Product	MF	Purity	Particle Size	Melting Point	Density	The color of the sky
Silicide of aluminum	AlSi2	99%	5-10um	1400	2.7g/cm3	gray-black

Chemical composition of AlSi2 Powder Aluminum Silicide:

AlSi2	Al	Si	Fe	Ca	S	P	C
99%	70%	Balance	0.2%	0.1%	0.02%	0.05%	0.02%

It is simple. Aluminium silicicide AlSi2 Aluminum powder produced?
An electrothermal process for making aluminum-silicon alloy is at around 2000°C. Alumina and silicon oxide, which are liquids during the metallurgical processes, are reduced by a carbonaceous agent. The maximum temperature the submerged arcane can achieve is usually about 1350°C to 2200°C.

Applicaciones Aluminum Silicide AlSi2 (Powder)
The ductility of an aluminum-silicon alloy is best when it has a low silicon content (such 0.7). It is also more malleable and can be used in deformed forms. But, when it has a higher silicon content (such 7%), it fills the melt better and is frequently used for Cast alloy.

When the aluminum-silicon alloys have a silicon content greater than 12.6% (silicon particle content as high as 14.5% or 25%), adding some Ni, Cu, Mg, and other elements to the alloy can increase Its complete mechanical properties.

These can be replaced by cast iron cylinders for a significant weight reduction. You can electrochemically treat the aluminum-silicon cylinder to remove the oxide from the exterior and keep the primary silicon dot embedded within the inner wall. Its wear and scratch resistance can be dramatically improved.

Due to its low weight and corrosion resistance, an alloy with between 11%-13% silicon content is one of the top piston materials.
1). Powder metallurgy materials made of aluminum silicide, AlSi2 (powder) are used. The silicide, which can form into a molten at high temperatures, is pressed to make a range of products.
2). AlSi2 aluminum silicide powder is used for the production of low strength castings in complex shapes, like bracket, cover, and motor shell.
3). As brazing solder, AlSi2 silicide AlSi2 is used.

Shipping and Packing of Aluminum Silicide AlSi2 Pulver:
We offer many packing options that are dependent on the amount of aluminum silica AlSi2 powder.
Powder packaging of aluminum silicicide AlSi2 You can vacuum pack 1kg/bag or 25kg/barrel.
Aluminium silicicide AlSi2 powder shipment: Could be sent by sea or air as soon as possible after receipt of payment.


Eduloc advanced materials Nano Technology Co. Ltd. (Eduloc), is an established global chemical supplier and manufacturer. They have over 12-years of experience providing high-quality chemicals and Nanomaterials including graphite powders, boride powders, nitride & graphite powders as well as super high-quality chemicals.
High-quality products are what you want Al Si2 Pulver Please feel free and contact us to make an enquiry. ( brad@ihpa.net )