Trending

Surfactant

  • 0
  • 0

GMS Glyceryl monostearate CAS 31566-31-1

If you are looking for high-quality products, please feel free to contact us and send an inquiry, email: brad@ihpa.net



GMS Glyceryl monstearate has two phases, 1-MG and 2MG. Mono-glyceride, which is a fatty acid, can be classified into mono-stearate (also called mono-laurate), mono-oleate (also known as mono-oleate), etc.

The following is a list of the most recent articles about GMS Glyceryl monostearate :
GMS Glycerin Monostarate can be prepared by esterifying C16-C18 long-chain fat acids with glycerol. It is a nonionic surfactant. It contains both hydrophilic, and oleophilic, groups. These groups have functions such as wetting, emulsifying and foaming. It is a pure white waxy solid that melts into a transparent liquid. The freezing point must not be less than 58. Tasteless, odorless, non-toxic. Insoluble in water, soluble with vegetable oil. Solvable in hot ethanol. It is oil-inwater-emulsifier that can emulsify. Due to its powerful emulsifying ability, it can be used for oil-in water emulsification. Commercially available goods come in white or yellowish powder or bead forms. It contains one ester and also a tiny amount of tryster, diester or both. The freezing point for pure products is lower.
GMS Glyceryl monstearate, a global leader in the industry. Please send us an inquiry to receive the latest. Glyceryl Monostearate Price If you want to purchase GMS Glyceryl monstearate in large quantities.
Product performance GMS Glyceryl monostearate :
1. Monoglycerides have sensory properties similar to oils. Their consistency depends on the fatty acids groups. They may be waxy, fatty, or oily. Monoglycerides generally have a higher consistency and melting temperature than oils or fatty acid. Monoglycerides' melting points vary according to the length of the carbon chain in fatty acids.
Color and smell of monoglycerides depend on the corresponding groups of fatty acids as well as the source of the raw materials. Monoglycerides are usually odorless and have a color that ranges from brown to white.
2. Thermal stability: Monoglyceride results from intramolecular acyl transfers. The activation energies of this intramolecular transfers are relatively low. Therefore, at any temperature, monoglyceride will be a mixture, with the proportion varying depending on the temperature.
3. Crystallization: Monoglycerides, as a lipid composition, exhibit a homogeneous multicrystalline behavior. The distilled monoglycerides first crystallize as metastable crystals a and then change to stable crystals b with a higher melting temperature. In industrial monoglycerides, metastable b-crystalline forms are not present. When the a crystalline form is cooled a solid state transition occurs to a sub-a crystalline form.
4. Mesomorphic Properties: Monoglycerides and water can interact in a complex manner. The level of interaction depends upon temperature, monoglyceride-to-water ratio and type of fatty acids. The resultant material exhibits both liquid and crystal properties. That is mesomorphism. The mesoporous mono-glycyl-ester phase is characterized by: lamellar mesophase, alpha gels, hexagons, and cubes. Monoglycerides are beta crystals at normal temperatures.

Technical Parameter GMS Glyceryl monostearate:
Product Name Short name Odor Appearance
Glycerin monostearate GMS Fat odors White to pale milky solid

Applications GMS Glyceryl monostearate :
GMS Glycerin monostarate is a strong antibacterial agent that can be used in food and medicine.
It is used as a compound in many formulas because it can form a complex, with starch or protein, to reduce its antibacterial effects. However, this complex has almost no effect on Gram negative bacteria.
2. GMS Glycerin monostarate GMS Glycerin is monostearate, which can be used to emulsify, stabilizer and preserve.
Used as a defoaming agent for soybean products and dairy products. Also used to stabilize cakes and margarine.
Useful as a foaming agent in soy sauce, lactic acid drinks, and soymilk.
The pharmaceutical industry uses it to make suppository base substances, drug carriers, cosmetic creams and creams.
3. GMS Glycerin monostarate can also be used as an stabilizer, emulsifier and preservative.
Emulsifiers, industrial silk oils and textile lubricants.
It is used in plastic processing as a lubricant and antistatic agent, as well as as a drip-and antifogging agents in plastic films. In the pharmaceutical sector, it is used as a base agent for suppository and a carrier of drugs. It can also be used in cosmetic creams.
4. GMS Glycerin monostarate is used as a daily chemical.
3.7 is an emulsifier for W/O emulsion. It can also be used for cream products.
Packing & Shipping GMS Glyceryl monstearate ?
GMS Glyceryl monstearate is available in a variety of different packaging options.
GMS Glyceryl monostarate packaging: 1kg/bottle; 25kg/barrel or 200kg/barrel.
GMS Glyceryl monostarate shipping: could send out by air or sea as soon as payment is received.

GMS Glyceryl monostearate Properties:

Alternative Names N/A
CAS Number 31566-31-1
Compound Formula C21H42O4
Molecular Mass N/A
Appearance White to pale milky solid
Melting Point N/A
Boiling Point N/A
Density N/A
Solubility In H2O N/A
Exact Magnitude N/A

GMS Glyceryl monstearate Health & Safety Information

Sign Word N/A
Hazard Statements N/A
Hazard Codes N/A
Risk Codes N/A
Safety Declarations N/A
Transport Information
N/A

Inquiry us

High Purity 3D Printing Nickel Alloy IN718 Powder

Metal Alloy 8.92g/Cm3 High Purity Polished Copper Plate

High Purity Germanium Sulfide GeS2 Powder CAS 12025-34-2, 99.99%

Metal Alloy 18g/cm3 High Density Tungsten Alloy Ball

Metal Alloy 18.5g/cm3 Polished Tungsten Heavy Alloy Plate

High Purity Molybdenum Boride MoB2 Powder CAS 12006-99-4, 99%

High Purity Antimony Sulfide Sb2S3 Powder CAS 1314-87-0, 99.99%

High Purity Nano Hafnium Hf powder CAS 7440-58-6, 99%

Metal Alloy High Density Tungsten Alloy Rod Grind Surface Tungsten Alloy Bar

High Purity Chromium Diboride CrB2 Powder CAS 12007-16-8, 99%

High Purity Vanadium Boride VB2 Powder CAS 12007-37-3, 99%

High Purity Tungsten Silicide WSi2 Powder CAS 12039-88-2, 99%

High Purity Calcium Nitride Ca3N2 Powder CAS 12013-82-0, 99.5%

High Purity 3D Printing Nickel-based Alloy IN738 Powder

High Purity Titanium Sulfide TiS2 Powder CAS 2039-13-3, 99.99%

High Purity 3D Printing Powder 15-5 Stainless Steel Powder

High Purity Nano Ag Silver powder cas 7440-22-4, 99%

High Purity Zirconium Nitride ZrN Powder CAS 25658-42-8, 99.5%

High Purity Titanium Nitride TiN Powder CAS 25583-20-4, 99.5%

Supply Magnesium Granules Mg Granules 99.95%

Our Latest Products

High Purity 3D Printing Nickel Alloy IN718 Powder

In718 Powder is widely used for industrial and aviation turbo-propellers, petrochemical, nuclear reactors, and other fields.Particle Size: 15-45mm; 15-53mm; 53-120mm and 53-150mm 3D Printing Nickel Alloy Inconel 718 Properties: Nickel Alloy IN71…

Metal Alloy 8.92g/Cm3 High Purity Polished Copper Plate

Copper products exhibit good electrical conductivity as well as thermal conductivity. They are also ductile, resistant to corrosion, and have high wear resistance. They are widely used by the electricity, electronics and energy industries. Metal Al…

High Purity Germanium Sulfide GeS2 Powder CAS 12025-34-2, 99.99%

Germanium Sulfide (GeS2) is a semiconductor compound with the chemical Formula GeS2. It has a high solubility level in water. It's also easily soluble when heated alkali is used.Particle size : 100mesh Purity: 99.99% About Germanium Sulfide (GeS2)…