Trending

Isostearamide MIPA CAS 152848-22-1

It is a light brown to yellow liquid when the temperature is above 25. It will precipitate or stratify after long-term storing below 25 degrees. When the temperature increases above 40 degrees, it will become homogeneous. Isostearamide MIPA is a go…

More>>

CAEO-15 Coconut amide ethoxylates CAS 61791-08-0

Coconut amide is a nonionic surfactant with excellent emulsification and cleaning properties. It also has antistatic, hard-water resistance, oil removal and degreasing properties. About Coconut amide ethoxylates: Coconut amide is a nonionic surfac…

More>>

Penetrating agent SF CAS 68238-81-3

Penetrating agent SF has excellent permeability properties and emulsification and cleaning abilities. It also produces low foam and is easy to remove oil. Alkylphenol Polyoxyenthylene Block Polyether Penetrating agent SF dissolves easily in water…

More>>

Glyceryl dioleate CAS 2442-61-7

Glyceryl dioleate exhibits dynamic surface tension and wettability. It also has defoaming, hard surface degreasing, and defoaming performances. Glyceryl dioleate is a glyceryl-dioleate. Glyceryl dioleate, light yellow liquid. HLB is approximately…

More>>

Linear C12-15 Alcohol ethoxylates CAS 68131-39-5

Linear Alcohol Ethoxylates C12-15 are non-ionic surfactants that offer high performance at a low cost. The Linear C12-15 Alcohol Ethoxylates Linear C12-15 Alcohol Ethoxylates is a range of nonionic surfactants that are excellent as detergents, emu…

More>>

Narrow distribution of Semi-branched C12-13 Alcohol ethoxylates CAS 160901-19-9

SAFOL EN Series is a multipurpose, narrow distribution, non-ionic, surfactant. It has lower foam, a better wetting ability and a cooler freezing point when compared with conventional nonionics. What is the Narrow Distribution of Semi Branched C12-1…

More>>

GlycerylI monooleate; GlyceryI oleate CAS 25496-72-4;111-03-5;68424-61-3

A light yellow liquid with a HLB value around 4.0. This product is synthetic. The molecule is linear and has excellent emulsification. It can be used to wash, moisturize, emulsify, and disperse. GlycerylI monooleate is a good example of this. A li…

More>>

Isotridecanol ethoxylates CAS 69011-36-5

Isotridecanol Ethoxylates are easily dispersed in water or soluble and can be used along with a wide range of surfactants, including cationic, non-ionic and anionic. About Isotridecanol ethoxylates: Isotridecanol Ethoxylates are easily dispersed i…

More>>

C6 Alkyl glucoside CAS 54549-24-5

C6 alkyl glucosides is typically 75% aqueous or neutral. Amber liquid. Low Surface Tension, Good Detergency. C6 Alkylglucoside: Amber liquid. Low surface tension. Good detergency. C6 Alkylglucoside has a pH of 7.5, is neutral or slightly alkaline.…

More>>

Octanol polyoxyethylene ether5

Octanol polyoxyethylene is a type of non-ionic detergent, soluble with water. Octanol Polyoxyethylene Ether: Octanol polyoxyethylene is a type of non-ionic detergent, soluble in aqueous solutions without gel phase. It is a global trusted brand…

More>>

Sodium n-Octanol sulfate CAS 142-31-4, 30%

The sodium n-Octanol Sulfate is a highly stable electrolyte that has a good electrolyte stability, and good compatibility with water.Solid Content: 30 % About Sodium N-Octanolsulfate The sodium n-Octanol is soluble and compatible with hard water.…

More>>

Isomeric alcohol ethoxylates CAS 9043-30-5

The ethoxylates of isomeric alcohol are easily dispersed and soluble in water. They can be used along with a wide range of surfactants, including cationic, non-ionic and anionic. The Isomeric alcohol Ethoxylates Isomeric alcohol is easily dissolve…

More>>

Related news

SLI-80 Sodium 2-(dodecanoyloxy)ethanesulfonate CAS 7381-01-3

SLI-80 is resistant to hard water. Its foaming properties are not affected. Solid content: 74%-83% What is ALS Ammonium Lauryl Sulfate? Ammonium Lauryl Sulfate features a rich, fine foam with low degreasing powers, good biodegradability, and low…

More>>

Germany Production Cuts Shutdowns Closures Panic buying will Affect the Price of cost of metal 3d printing

It is reported that the price of imported energy in Germany was 129.5% higher than that in February 2021, the cost of domestically produced en…

More>>

Tantalum Carbide Market Report and Outlook (2025-2030) sic tac

Specification of Tantalum CarbideWe give high-quality Tantalum Carbide (TaC) powder with a CAS number of 12070-06-3. Our product includes a real density of 13.9 g/cm ³ and a mass thickness of 2.5 g/cm ³, demonstrating its compact and solid framework.…

More>>

High Purity 3D Printing Nickel Alloy IN718 Powder

Metal Alloy 8.92g/Cm3 High Purity Polished Copper Plate

High Purity Germanium Sulfide GeS2 Powder CAS 12025-34-2, 99.99%

Metal Alloy 18g/cm3 High Density Tungsten Alloy Ball

Metal Alloy 18.5g/cm3 Polished Tungsten Heavy Alloy Plate

High Purity Molybdenum Boride MoB2 Powder CAS 12006-99-4, 99%

High Purity Antimony Sulfide Sb2S3 Powder CAS 1314-87-0, 99.99%

High Purity Nano Hafnium Hf powder CAS 7440-58-6, 99%

Metal Alloy High Density Tungsten Alloy Rod Grind Surface Tungsten Alloy Bar

High Purity Chromium Diboride CrB2 Powder CAS 12007-16-8, 99%

High Purity Vanadium Boride VB2 Powder CAS 12007-37-3, 99%

High Purity Tungsten Silicide WSi2 Powder CAS 12039-88-2, 99%

High Purity Calcium Nitride Ca3N2 Powder CAS 12013-82-0, 99.5%

High Purity 3D Printing Nickel-based Alloy IN738 Powder

High Purity Titanium Sulfide TiS2 Powder CAS 2039-13-3, 99.99%

High Purity 3D Printing Powder 15-5 Stainless Steel Powder

High Purity Nano Ag Silver powder cas 7440-22-4, 99%

High Purity Zirconium Nitride ZrN Powder CAS 25658-42-8, 99.5%

High Purity Titanium Nitride TiN Powder CAS 25583-20-4, 99.5%

Supply Magnesium Granules Mg Granules 99.95%